Edge Erase - Xerox WorkCentre 5022 User Manual

Edge Erase

You can set to erase the black shadows created around the edge of the paper when copying with the
document cover open or copying a bound document.
You can set a value between 0 and 50 mm (in 1 mm increments) for the Edge Erase feature.
Notes
• The value set for Edge Erase applies to all four edges of the document.
• For ID card copy, Edge Erase is set separately. For more information, refer to
10.
Select Edge Erase, and then press the OK button.
1.
Copy
Original-Binding...
Output-Binding P...
Edge Erase...
2. Use the numeric keypad to enter a value, and then press the OK button.
Edge Erase
[0 - 50]
2
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
User Guide
111
1
Flip on Long
Flip on Long
2mm
1
Qty.
Copy
Edge Erase on page 9-
5-23