Tray Settings - Xerox WorkCentre 5022 User Manual

Tools

Tray Settings

The Tray Settings set the paper type (paper quality) for each paper tray. The Tray Settings is also used
to set the paper size for Paper Tray 5 (bypass).
To maintain the same print quality after changing the quality of paper in a tray, change the tray's
default paper quality setting to match the new paper.
Tray 2 to Tray 4 are displayed when the optional paper trays are mounted.
For information on how to display the Tray Settings screen, refer to System Settings Procedure on
page 9-1.
Tray 1
Paper Type
Sets the type (quality) of the paper in Tray 1.
You can select Plain 1, Plain 2, or Lightweight.
Plain 1 is set at the time of factory shipment.
Tray 2 to Tray 4
Paper Type
Sets the type (quality) of the paper in Tray 2 to Tray 4 (optional trays).
You can select Plain 1, Plain 2, Heavyweight, Extra-HW, or Lightweight.
Tray 5
Paper Size
Sets the size of the paper in Tray 5 (bypass).
You can select A3 (297 x 420mm), A4 (297 x 210mm), A4 (210 x 297mm), B4 (257 x
364mm), B5 (257 x 182mm), B5 (182 x 257mm), 8K (270 x 390mm), 16K (270x 195mm),
16K (195 x 270mm), A5 (148 x 210mm), 11 x 17" , 8.5 x 14" , 8.5 x 13" , 8.5 x 11" , 8.5 x
11" , Custom 1 - Custom 5, or Custom Size.
If you select Custom Size and press the OK button, you can set a non-standard paper size (X
(horizontal) 98 to 432 mm, Y (vertical) 127 to 297 mm).
A4 (297 x 210mm) is set at the time of factory shipment.
9-16 ® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
User Guide