Xerox WorkCentre 5022 User Manual page 192

Tools
Item
Send Header
Company Name
Fax Number
Forward
Auto Reduce On Receipt
Border Limit
Receive Size
Print Size (Received Letter)
Immediate Fax Switch
Off Hook Level
Region
Activity Report
Transmission Report
Broadcast Report
Protocol Report
System Settings
Power Saver Timer
Auto Reset
Auto Print
Idle Timeout
Job Cancel
Clock
9-6
Description
Used to set whether to send information including the print
date and sender information on outgoing faxes or not.
Used to register the sender name.
Used to register the machine's fax number.
Used to set whether to forward the incoming fax or not.
Used to set whether to reduce the image size when the
incoming data is too large for the output paper.
Used to set the image size limit at which to split the page
when the incoming data is too large for the output paper.
Used to restrict the paper size of faxes that can be received.
Used to set whether to print the incoming Letter size data
on Letter paper or A4 paper.
Used to set the remaining memory level at which to move
to immediate communications during fax transmission.
Used to set the detection level of an off-the-hook receiver
when using an external phone.
Used to set the region name.
Used to set whether to automatically print out the results of
sent and received documents that are stored in memory.
Used to set the method used to print fax transmission
results.
Used to set the method of printing transmission results
when "broadcasting" (sending the same fax to multiple
recipients at once).
Used to set the method used to print protocols.
Used to set other functions.
Used to set the amount of time the machine waits before
entering its power-saving modes.
Used to set the amount of time the machine waits before
resetting the screen while an operation is being performed.
Used to set the amount of time the machine waits before
starting to print and after receiving a print job.
Used to set the amount of time the machine waits before
documents are added.
Used to set whether to automatically cancel the job when a
job error occurs.
Used to set the time on the machine's system clock.
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
See Page
P. 9-36
P. 9-36
P. 9-36
P. 9-36
P. 9-37
P. 9-37
P. 9-37
P. 9-38
P. 9-38
P. 9-38
P. 9-38
P. 9-39
P. 9-40
P. 9-40
P. 9-41
P. 9-42
P. 9-42
P. 9-42
P. 9-42
P. 9-43
P. 9-43
P. 9-43
User Guide