Chapter 10
[1]
[2]
F-10-36
3) Release the claw to remove the document edge
sensor [1], and then disconnect the connector [2].
[2]
F-10-37
10.4.14 Pick-up Solenoid
10.4.14.1 Removing the Pickup Solenoid
1) Remove the feed frame unit.
2) Remove the three screws [1], and then remove the
drive unit [2].
[1]
0013-1452
[1]
F-10-38
3) Remove the screw [1], and then remove the
pickup solenoid [2].
[2]
F-10-39
10.4.15 Registaration Solenoid
10.4.15.1 Removing the Registration
Solenoid
1) Remove the feed frame unit.
2) Remove the three screws [1], and then remove the
drive unit [2].
[2]
[1]
0013-1453