Configure The Autoprovisioning Parameters - CyberData 011186 Operation Manual

2.4.14 Configure the Autoprovisioning Parameters

Autoprovisioning can be used to configure your device automatically on boot, after a periodic delay,
after sitting idle for a period of time, or at a specified time.
The autoprovisioning file contains the board configuration in xml format. Autoprovisioned values in
this file will override values stored in on-board memory.
The autoprovisioning file can be hosted with a tftp or a web server and by default is named according
to the MAC address of the device (for example: 0020f7350058.config). The autoprovisioning
filename can also be specified.
The device does not have a real time clock but can sync with a network time server on boot.
1. Click the Autoprov menu button to open the Autoprovisioning page. See
Operations Guide
Figure 2-32. Autoprovisioning Page
930796K
Installing the VoIP Outdoor Intercom
Intercom Setup
Figure 2-32.
CyberData Corporation
68