Configure The Night Ringer Parameters - CyberData 011113 Operation Manual

2.10.8 Configure the Night Ringer Parameters

When the Nightringer is enabled, the Intercom will register as a second SIP extension. Registration
does not have to be to the same server as the primary SIP registration. Any calls made to the
Nightringer extension will cause the Intercom to play a ring tone. There is no way to answer this call.
The Nightringer is designed to be used in buildings where calls made after hours are directed to a
ring group.
1. Click on the Nightringer button to open the Nightringer Configuration page. See
Operations Guide
Figure 2-19. Nightringer Configuration Setup
930915D
Installing the VoIP Indoor Intercom with Keypad
CyberData Corporation
38
Intercom Setup
Figure 2-19.