Configure The Network Parameters - CyberData 011030 Operation Manual

Web Page Item

2.3.2 Configure the Network Parameters

1. Click the Network Setup button to open the Network Setup page
2. On the Network Setup page, enter values for the parameters indicated in
Web Page Item
IP Addressing*
IP Address*
Subnet Mask
Operations Guide
Table 2-4. Home Page Overview
Description
Link to the SIP Setup web page.
Link to the Upgrade Firmware web page.
Figure 2-14. Network Setup Page
Table 2-5. Network Setup Parameters
Description
Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
go to Step 3.
Enter the Static IP address.
Enter the Subnet Mask address.
930260A
Installing the VoIP Indoor Intercom
Configure the Intercom Parameters
(Figure 2-14).
Table 2-5.
Table 2-5 . If you select DHCP,
CyberData Corporation
17