Setting The Date And Time - Siemens S790 User Manual

Setting the date and time

Set the date and time so that the correct date and time can be assigned to
incoming calls, and so that the alarm can be used.
Date:
31.01.2009
Time:
00:00
Back
¤
Enter the hours and minutes in
4-digit format via the keypad,
e.g., QM 5
for 07:15 am.
Change the input position with
the control key if necessary.
Calls Time
Date/Time
Save
¤
Press the key below
play screen to open the input field.
(If you have already set the time and
date, open the input field via the
menu
The
Date/Time
the display.
¤
The active input position flashes.
Enter day, month and year as an
8-digit number via the keypad,
e.g., 4 Q2Q
QO for 14/10/2009.
Press the right or left control
key to change the input posi-
tion and correct an entry.
¤
Press down on the control key to switch
to the time input field.
on the dis-
§Time§
¢
page 27.)
submenu is shown on
Date/Time
Date:
14.10.2009
Time:
00:00
Back
First steps
Save
15