C675 User manual system English
Quick Index
Registering Handset
Handset will auto register to base on first using.
If auto register failed, please do the operations as belowing.
Register
Operations on Handset:
Press 菜 单 v ▲ ▼ Select A D V A N C E D S E T . OK
v ▲ ▼ R E G I S T R A T I O N OK v R E G I S T E R H A N D S E T ? OK
v P L E A S E C O N F I R M R E G I S T R A T I O N OK v H O L D B A S E P A G E W A I T F O R B E E P
Operations on Base:
Hold Base Paging key until Beep v I n p u t H a n d s e t N a m e OK
After registered successfully, the handset goes back to idle status. The and the
handset number will display on the displayer.
You can register 4 handsets on 1 Base at most.
If fail to register, please repeat the operation above and try again.
Deregister
Deregistering handsets
Notice: Don't do this unless necessary!
Press 菜 单 v ▲ ▼ Select A D V A N C E D S E T . OK
v ▲ ▼ D E R E G I S T R A T I O N OK v M O V E T O B A S E C O N F I R M D E R E G OK
v D E R E G I S T E R E D
Handset will ask for registering after deregistered, otherwise you will not able to
dial by handset.
Paging
Paging handsets
You can locate your handset using the base station.
Briefly press 对讲/呼叫 (paging) v P A G I N G E X T E N S I O N ?
v Input the number of handset for paging, press * Key for all handsets.
Handset paged will ring, even if the ringer tone was switched off.
End paging:
briefly press 对讲/呼叫 (paging) key on the base station or a key on handset.
Setting Time and Date
Time
Press 菜 单 v ▲ ▼ Select T I M E S E T T I N G OK v Input Time/Date OK
Setting
e.g.(only for reference):
Setting Time/Date to 2008-7-17 20:38
Enter T I M E S E T T I N G ,Ordinal inputing:203820080717 OK
Remind with friendliness:
You do not need to set Time/Date again on base, for handset will synchronize this
setting to base automatically.
8