1. Manuals
  2. Brands
  3. Compass Model Manuals
  4. Toy
  5. Chronos
  6. Manual

Compass Model Chronos Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Height: 410mm
Width: 213mm
Length: 1334mm
Gear Ratio: 9.77:1:4.8
Weight: 4900-5800g
Copyright @
Compassmodel 2014
Blades: 685-710mm
www.compassmodel.com
Batt.: 12S-14S 4500-6000mAh

Advertisement

Table of Contents
loading

Related Manuals for Compass Model Chronos

Summary of Contents for Compass Model Chronos

  • Page 1 Height: 410mm Width: 213mm Length: 1334mm Gear Ratio: 9.77:1:4.8 Weight: 4900-5800g Copyright @ Compassmodel 2014 Blades: 685-710mm www.compassmodel.com Batt.: 12S-14S 4500-6000mAh...

  • Page 2: Table Of Contents

    Content / Inhaltsverzeichnis Page Topic Thema Front Cover Deckblatt Content Inhaltsverzeichnis Content Inhaltsverzeichnis Content Inhaltsverzeichnis Introduction, Warranty, Safety (eng) Einleitung, Garantie und Sicherheit (eng) Introduction, Warranty, Safety (de) Einleitung, Garantie und Sicherheit (de) Technical Specification Technische Daten Basic Information Grundlagen (eng) Basic Information Grundlagen (de) STEP1: Main Blade Grips...

  • Page 3: Content

    Content / Inhaltsverzeichnis Page Topic Thema STEP22: Tail support Schritt 22: Heckstreben STEP23: Main pulley Schritt 23: Hauptriemenrad STEP24: Main gear 1 Schritt 24: Hauptzahnrad 1 STEP25: Main gear 2 Schritt 25: Hauptzahnrad 2 STEP26: Counter bearing block Schritt 26: Gegenlagerplatte STEP27: Motor mount 1 Schritt 27: Motorhalterung 1 STEP28: Motor mount 2...

  • Page 4: Content

    Content / Inhaltsverzeichnis Page Topic Thema STEP52: Swash links Schritt 52: Taumelscheibengestänge STEP53: Swash guide Schritt 53: Taumelscheibenführung STEP54: Servo arms to servos Schritt 54: Servohebel Montage STEP55: FBL unit and receiver Schritt 55: Flybarless und Empfänger STEP56: ESC and BEC Schritt 56: Motorregler und BEC STEP57: Battery installation Schritt 57: Akkupack-Befestigung...
  • Page 5 The manufacturer’s warranty covers defects in material or workmanship, or missing components, to the original purchaser for 30 days from the date of purchase. Compass Model Ltd. will replace or repair, at our discretion, the defective or missing component(s). Defective components must be returned to our Distributor prior to replacement.
  • Page 6 Haftung für Schäden, die aus der Montage und/oder Gebrauch/Missbrauch des Produktes hervorgehen. Obwohl der Compass Chronos durch einen Elektromotor betrieben wird, sollte er mit der gleichen Sorgfalt wie ein Verbrennermodell gebaut und betrieben werden. Betreiben Sie Ihren Chronos stets mit größter Vorsicht und Sicherheit.

  • Page 7: Technical Specification

    Technical Specification / Technische Daten Height / Höhe 410mm Width / Breite 213mm (170mm) Lenght / Länge 1334mm Gear Ratio (13T) / Untersetzung (13 Zähne) 9.77 : 1 : 4.8 Take Off Weight with Battery / Startgewicht mit Akku 4800 - 5800g Motor KV / Motor KV 400-600KV Rotor Blades / Rotorblätter...

  • Page 8: Basic Information

    Nylon lock nuts should be not be re-used, as the friction is greatly reduced after one use. damage the nylon. Compass Model always takes care to use high quality ball bearings, but even the best bearings need to be checked periodically, or after a crash.

  • Page 9: Basic Information

    Nylon Stoppmuttern sollten nach einmaligen Gebrauch getauscht werden um eine ideale Funktion zu gewährleisten. Compass Model ist stets bemüht hochwertige Kugellager zu verwenden, aber auch diese müssen von Zeit zu Zeit, oder nach einem Absturz geprüft werden. Vermeiden Sie Öle zum Schmieren der Kugellager, da diese nicht druckfest sind und das Lager früher verschleißen oder fressen kann.

  • Page 10: Step1: Main Blade Grips

    Main Blade Grips (2x) Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Main Grip 11-0102 Verwenden Sie auf allen Schrauben die in Metallteile Washer 10.2x14.5x0.5 82-101405 geschraubt werden mittelfeste Schraubensicherung. Bearing 10x19x5 60-10195 Preassembled at factory.

  • Page 11: Step2: Main Grip Arms

    Main Grip Arms (2x) Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP1 Verwenden Sie auf allen Schrauben die in Metallteile Main grip arm 11-7068 geschraubt werden mittelfeste Schraubensicherung. Cap Socket Bolt M3x12 80-0312SS Preassembled at factory.

  • Page 12: Step3: Main Rotor Head

    Main rotor head 1 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Rotor hub 11-7067 Verwenden Sie auf allen Schrauben die in Metallteile Rotor brake 11-7083 geschraubt werden mittelfeste Schraubensicherung. Spindle 11-0117 Coat all surfaces of dampers (5) Main shaft 11-7102 inside and out with enough silicon...
  • Page 13 Main rotor head 2 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP3 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP2 geschraubt werden mittelfeste Schraubensicherung. Plastic Sleeve 10x15.2x5.8 11-0119 Preassembled at factory.

  • Page 14: Step5: Swash Driver

    Swash driver (2x) Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Swash driver 09-7210 Verwenden Sie auf allen Schrauben die in Metallteile Bearing 4x8x3 61-4083 geschraubt werden mittelfeste Schraubensicherung. Ball link 3mm 02-0709S Preassembled at factory.

  • Page 15: Step6: Main Rotor Head

    Main rotor head 3 (2x) Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP4 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP5 geschraubt werden mittelfeste Schraubensicherung. Apply threadlock into threads in the main grip arms. Attach swash drivers (2) to main grip arms, being careful to not get any threadlock in the bearings.

  • Page 16: Step7: Swashplate

    Swashplate Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Swashplate 11-0408S Verwenden Sie auf allen Schrauben die in Metallteile Link ball M2.5 02-0701S geschraubt werden mittelfeste Schraubensicherung. Swash pin 02-0701A Preassembled at factory. Bereits vormontiert.

  • Page 17: Step8: Main Rotor Head

    Main rotor head 4 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP 6 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP 7 geschraubt werden mittelfeste Schraubensicherung. Slide swashplate (2) onto main shaft. Snap ball links onto balls with the word Compass writing facing outward.

  • Page 18: Step9: Tail Grip

    Tail grip (2x) Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Tail grip 09-7208 Verwenden Sie auf allen Schrauben die in Metallteile Link ball M2.5 02-0701S geschraubt werden mittelfeste Schraubensicherung. Mount link balls (2) to tail grips (1). Do not overtighten screw threaded into plastic parts.

  • Page 19: Step10: Tail Rotor Hub

    Tail rotor hub 1 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Tail rotor hub 09-7209 Verwenden Sie auf allen Schrauben die in Metallteile Washer 3.2x7.4x0.8 82-3708 geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M3x6 80-0306 Preassembled at factory.

  • Page 20: Step11: Tail Rotor Hub

    Tail rotor hub 2 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Cap socket head bold M3x22 80-0322 Verwenden Sie auf allen Schrauben die in Metallteile Nylock nut M3 91-0003 geschraubt werden mittelfeste Schraubensicherung.

  • Page 21: Step12: Tail Pitch Slider

    Tail pitch slider Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Tail pitch sleeve 09-0213 Verwenden Sie auf allen Schrauben die in Metallteile Bearing 8x12x3.5 60-8123 geschraubt werden mittelfeste Schraubensicherung. Tail pitch slider 09-0229 Preassembled at factory.

  • Page 22: Step13: Tail Control Arm

    Tail control arm Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Cap socket head bolt M2x6 80-0206S Verwenden Sie auf allen Schrauben die in Metallteile Cap socket head bolt M3x20 80-0320SS geschraubt werden mittelfeste Schraubensicherung.
  • Page 23 Tail case 1 (2x) Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Tail sideframe (Aluminium) 09-7050N Verwenden Sie auf allen Schrauben die in Metallteile Bearing 6x13x5 61-6135 geschraubt werden mittelfeste Schraubensicherung. Preassembled at factory. Bereits vormontiert.
  • Page 24 Tail shaft Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Tail pulley 17T 09-7075N Verwenden Sie auf allen Schrauben die in Metallteile Tail rotor shaft 09-0214 geschraubt werden mittelfeste Schraubensicherung. Spring pin 2.5x14 84-2514 Preassembled at factory.

  • Page 25: Step14: Tail Case

    Tail case 2 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Tail case center 09-7051 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP14 geschraubt werden mittelfeste Schraubensicherung. Parts from STEP15 Preassembled at factory.
  • Page 26 Idler Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Tail guide wheel collar 09-7066 Verwenden Sie auf allen Schrauben die in Metallteile Bearing 3x6x2 61-3062 geschraubt werden mittelfeste Schraubensicherung. Spacer tail guide wheel 09-7067 Preassembled at factory.

  • Page 27: Step16: Tail Case

    Tail case 3 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Tail boom Chronos 09-7072A Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP17 geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M2.5x6 80-2506SS Feed belt all the way into tail boom.

  • Page 28: Step19: Tail Rotor

    Tail rotor 1 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP12 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP11 geschraubt werden mittelfeste Schraubensicherung. Parts from STEP19 Set screw M4x4 81-0404 Push tail pitch slider assembly(1) onto tail rotor shaft of tail unit (3) assembled in STEP19.

  • Page 29: Step20: Tail Rotor

    Tail rotor 2 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP19 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP13 geschraubt werden mittelfeste Schraubensicherung. Mount tail pitch control arm (2) assembled in Step 13, to tail unit (1). Ball must be in the plastic sliding tube. Carefully tighten bolt so that entire mechanism moves very smoothly! Montieren Sie den Heckanlenkebel (2) aus Step 13 an die Heckeinheit (1).

  • Page 30: Step21: Tail Control Rod

    Tail control rod Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Tail control rod 4mm 09-7012S Verwenden Sie auf allen Schrauben die in Metallteile Wire link rod M2 geschraubt werden mittelfeste Schraubensicherung. Delrin tail link support 09-7080 Preassembled at factory.

  • Page 31: Step22: Tail Support

    Tail support Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP21 Verwenden Sie auf allen Schrauben die in Metallteile Tail support braces 09-0820S geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M3x30 80-0330SS Push tail control rod guide onto tail Nylock nut M3...

  • Page 32: Step23: Main Pulley

    Main pulley Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Main pulley 09-7026 Verwenden Sie auf allen Schrauben die in Metallteile Main pulley hub 09-7070 geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M2.5x8 80-2508SS Preassembled at factory.

  • Page 33: Step24: Main Gear

    Main gear 1 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Main gear 05-4602L Verwenden Sie auf allen Schrauben die in Metallteile Autorotation hub 05-0602 geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M3x8 80-0308SS Preassembled at factory.
  • Page 34 Main gear 2 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP24 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP23 geschraubt werden mittelfeste Schraubensicherung. One way sleeve 09-7103 Preassembled at factory.

  • Page 35: Step26: Counter Bearing Block

    Counter bearing block Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Counter bearing block 09-7058 Verwenden Sie auf allen Schrauben die in Metallteile Bearing 6x15x5 61-6155 geschraubt werden mittelfeste Schraubensicherung. Preassembled at factory. Bereits vormontiert.

  • Page 36: Step27: Motor Mount

    Motor mount 1 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP26 Verwenden Sie auf allen Schrauben die in Metallteile Motor mount 09-7059 geschraubt werden mittelfeste Schraubensicherung. Motor mount spacer 09-7053 Preassembled at factory.
  • Page 37 Motor mount 2 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP27 Verwenden Sie auf allen Schrauben die in Metallteile 700-800 size BL motor ~500KV SZ4926-510 geschraubt werden mittelfeste Schraubensicherung. Helical pinion 13T 07-4313L Preassembled at factory.

  • Page 38: Step29: Upper Bearing Blocks

    Upper bearing blocks (2x) Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Bearing block 11-7041 Verwenden Sie auf allen Schrauben die in Metallteile Bearing 14x25x6 60-14256 geschraubt werden mittelfeste Schraubensicherung. Button head bolt M2.5x5 79-2505SS Preassembled at factory.

  • Page 39: Step30: Center Block

    Center block 1 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP29 Verwenden Sie auf allen Schrauben die in Metallteile CF stiffener 09-7003 geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M3x8 80-0308SS Preassembled at factory.
  • Page 40 Center block 2 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP30 Verwenden Sie auf allen Schrauben die in Metallteile Swash-Servo Standard-size/ 20mm geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M2.5x8 80-2508SS Washer 2.7x7x0.8 10-5009...

  • Page 41: Step32: Lower Bearing Block

    Lower bearing block Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Bearing block 09-7042Z Verwenden Sie auf allen Schrauben die in Metallteile Bearing 10x19x5 60-10195 geschraubt werden mittelfeste Schraubensicherung. Preassembled at factory. Bereits vormontiert. Press the bearing (2) into bearing block (1) and secure it with bearing retainer.

  • Page 42: Step33: Esc Mount

    ESC mount Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. ESC mount 09-7004 Verwenden Sie auf allen Schrauben die in Metallteile Frame spacer (2 different ones) 09-7045 geschraubt werden mittelfeste Schraubensicherung. Flat head bolt M3x8 78-0308SS Preassembled at factory.

  • Page 43: Step34: Tail Boom Clamp

    Tail boom clamp Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Gyro mount 09-7005 Verwenden Sie auf allen Schrauben die in Metallteile Boom clamp 09-7060 geschraubt werden mittelfeste Schraubensicherung. Flat head bolt M3x8 78-0308SS Preassembled at factory.

  • Page 44: Step35: Belt Tensioner

    Belt tensioner Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Upper belt tensioner mount 09-7078S Verwenden Sie auf allen Schrauben die in Metallteile Lower belt tensioner mount (thread) 09-7078S geschraubt werden mittelfeste Schraubensicherung. Tail belt guide pulley 09-7071SA Preassembled at factory.

  • Page 45: Step36: Reinforcements Front

    Reinforcements front (2x) Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. CF reinforcement front 11-0006 Verwenden Sie auf allen Schrauben die in Metallteile Canopy standoff 14-2010 geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M3x8 80-0308SS Preassembled at factory.

  • Page 46: Step37: Canopy Mounts Rear

    Canopy mounts rear (2x) Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. CF canopy break-off 09-7011 Verwenden Sie auf allen Schrauben die in Metallteile Canopy standoff 14-2010 geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M3x8 80-0308SS Preassembled at factory.

  • Page 47: Step38: Lower Frame

    Lower frame 1 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Lower CF frame 09-7002A Verwenden Sie auf allen Schrauben die in Metallteile Battery sliding rail 09-7061U geschraubt werden mittelfeste Schraubensicherung. Parts from STEP36 Preassembled at factory.

  • Page 48: Step39: Upper Left Frame

    Upper left frame 1 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Upper left CF frame 09-7001LA Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP35 geschraubt werden mittelfeste Schraubensicherung. Parts from STEP37 Preassembled at factory.
  • Page 49 Upper left frame 2 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP39 Verwenden Sie auf allen Schrauben die in Metallteile Tail-Servo Standard-size/ 20mm geschraubt werden mittelfeste Schraubensicherung. Servo spacer 09-7024 Do not overtighten screws Cap socket head bolt M2.5x20 80-2520SS...

  • Page 50: Step41: Upper Right Frame

    Upper right frame Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Upper right CF frame 09-7001LB Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP37 geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M3x10 80-0310SS Preassembled at factory.

  • Page 51: Step42: Upper Frame

    Upper frame Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP40 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP41 geschraubt werden mittelfeste Schraubensicherung. Parts from STEP28 Preassembled at factory. Parts from STEP31 Parts from STEP34 Bereits vormontiert.
  • Page 52 Lower frame 2 Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP42 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP32 geschraubt werden mittelfeste Schraubensicherung. Parts from STEP33 Preassembled at factory. Parts from STEP38 Cross member 02-0807...

  • Page 53: Step44: Belt Tensioner Rubber

    Belt tensioner rubber Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP44 Verwenden Sie auf allen Schrauben die in Metallteile Rubber band 09-7092 geschraubt werden mittelfeste Schraubensicherung. Preassembled at factory. Bereits vormontiert. Unscrew the four bolts left loose in STEP35 and STEP39 and remove the two belt tension collars.

  • Page 54: Step45: Struts

    Struts(2x) Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. CF struts 11-0833 Verwenden Sie auf allen Schrauben die in Metallteile Plastic skid clamp 11-0821C geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M2.5x12 80-2512SS Preassembled at factory.

  • Page 55: Step46: Landing Gear

    Landing gear Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP45 Verwenden Sie auf allen Schrauben die in Metallteile Skids 05-0814S geschraubt werden mittelfeste Schraubensicherung. Skid caps 02-0820 Preassembled at factory. Skid dampeners 02-0821C Bottom plate...

  • Page 56: Step47: Tail And Head To Frame

    Tail and head to frame Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP44 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP8 geschraubt werden mittelfeste Schraubensicherung. Parts from STEP22 Parts from STEP25 Mast lock collar 11-0606...

  • Page 57: Step48: Main Rotor Fixation

    Main rotor fixation Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP47 Verwenden Sie auf allen Schrauben die in Metallteile Cap socket head bolt M3x10 80-0310SS geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M4x30 80-0430 Nylock nut M4 91-0004...

  • Page 58: Step49: Landing Gear To Frame

    Landing gear to frame Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP48 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP46 geschraubt werden mittelfeste Schraubensicherung. Boom support collar 11-7055 Cap socket head bolt M3x10 80-0310SS...

  • Page 59: Step50: Belt Tension

    Belt tension Pos. Description Qty. Part number Parts from STEP49 Screwdriver Push the belt tensioner arm forward to loosen it. Put a screwdriver between the belt tensioner arm (picture 1, green) and the belt tensioner mount (picture 1, red) to lock it. Now you can tension the belt as usual.

  • Page 60: Step51: Servo Arms

    Servo arms Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Stainless link ball 02-0701 Verwenden Sie auf allen Schrauben die in Metallteile Cap socket head bolt M2x8 80-0208S geschraubt werden mittelfeste Schraubensicherung. Hex nut M2 90-0201 Servo arm 15mm Servo arm 15-17mm...

  • Page 61: Step52: Swash Links

    Swash links Pos. Description Qty. Part number Ball link 3mm 02-0709S Stainless steel link Tread ball links approximately the same distance onto both ends of each linkage rods, using lengths from table below as a starting point. Note: The lengths may require a small readjustment. Do not use pliers to hold ball links while adjusting them, as this may cause damage.

  • Page 62: Step53: Swash Guide

    Swash guide Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP52 Verwenden Sie auf allen Schrauben die in Metallteile Swashplate guide 09-7022 geschraubt werden mittelfeste Schraubensicherung. Cap socket head bolt M2.5x10 80-2510SS Mount swash guide (2) with bolts (3) to upper bearing block of STEP52 (1) Montieren Sie die Taumelscheibenführung (2) mit den Schrauben (3) an den oberen Lagerbock der...

  • Page 63: Step54: Servo Arms To Servos

    Servo arms to servos Use medium threadlock on all Pos. Description Qty. Part number screws threaded into metal parts. Parts from STEP53 Verwenden Sie auf allen Schrauben die in Metallteile Parts from STEP51 geschraubt werden mittelfeste Schraubensicherung. Servo bolts Mount Servo arms from STEP51 (1) to swashplate servos and tail servo from STEP53 (1). The servo arm with the link ball facing towards the servo has to be mounted onto the elevator servo.

  • Page 64: Step55: Fbl Unit And Receiver

    FBL unit and receiver Use alcohol to clean and degrease Pos. Description Qty. Part number bonding surfaces. Parts from STEP54 Bitte benutzen Sie Alkohol zum reinigen und entfetten der Klebestellen. Flybarless unit Receiver Double sided tape Mount FBL Unit (2) on gyro tray of STEP54 (1) using the manufacturer's recommended adhesive pad. If none is provided, use a tough, thin pad.

  • Page 65: Step56: Esc And Bec

    ESC and BEC Use alcohol to clean and degrease Pos. Description Qty. Part number bonding surfaces. Parts from STEP55 Bitte benutzen Sie Alkohol zum reinigen und entfetten der Klebestellen. Double sided tape Velcro straps VBT300 Mount ESC (2) on and BEC (3) under ESC tray of STEP55 (1) using some stripes of double sided tape. To secure ESC (2) and BEC (3) tighten them with two velcro straps (5).

  • Page 66: Step57: Battery Installation

    Battery installation Pos. Description Qty. Part number Battery tray 09-7008S Lipo Battery 2x6s or 12s 5000mAh Velcro strap VBT300 Put battery packs (2) onto battery tray (1) and secure them with at least 4 velcro straps (3). The battery tray (1) has a special foam on it which prevents the battery to slip out of its position. If you prefer you can mount the battery packs (2) with double sided tape or hook and loop tape too.

  • Page 67: Step58: Battery Tray System

    (4). The Chronos has got three different positions to secure your battery pack. Use the one that fits your CG setting. Note: NEVER forget to secure the battery pack with battery lock and spring split pin! Schieben Sie den Akkupack aus STEP57 (2) in den Hauptrahmen aus STEP57 (1).

  • Page 68: Step59: Rotorblades

    Rotorblades Pos. Description Qty. Part number Parts from STEP58 Main rotor blades 685-710mm F-40-4700 Tail rotor blades 105-115mm F-05-0115T Remove blade bolt and nylock nuts from main and tail blade grips and mount main rotor blades as shown below. Install a spacer washer above and below respectively on both sides each blade root, in the grip.

  • Page 69: Step60: Canopy

    Canopy Pos. Description Qty. Part number Chronos Canopy 11-7200 Quickrelease rubber grommet 02-8853 Quickrelease button 10-6000 Push rubber grommets (2) through holes in canopy (1). Use a 1.5 mm hex driver to press the bulge of the grommets though the holes, being careful not to damage the rubber with the sharp edges of the tool. Press canopy quick release buttons (3) through the grommets (2).

  • Page 70: Step61: Congratulations

    Stecken Sie noch einmal die selbe Aufmerksamkeit in das Setup der Elektronik und Sie werden viel Spaß mit ihrem Chronos 700 haben. Wir hoffen Sie hatten keine Probleme beim Bau - Falls doch so wenden Sie sich doch am besten an unseren Kundensupport.

  • Page 71: Step62: Wiring

    Wiring Never use RC components with damaged wires. Check all wires for damaged insulation and breakage. Make sure all servo connectors fit tightly, and that no wires are loose in their connectors. All wires must be protected against damage from sharp edges of carbon frame and metal parts (carbon fiber and metal parts are conductive).

  • Page 72: Step63: Flybarless Setup

    Flybarless Setup 1 For easy measurement of pitch angles during setup, place something long and straight (like a flybar or CF-Tube) on the bearing block in front the main rotor shaft (see drawing below). This will allow you to use a normal pitch gauge to set the collective and cyclic pitch.
  • Page 73 Flybarless Setup 2 Hitec/Futaba Aileron Elevator ESC Signal Ch3 Gyro Gain Aux2 Rudder Pitch Aux1 Follow the instructions that came with your radio and FBL unit very carefully. Note that each manufacturer does things differently. Follow the manuals step by step, and ask for assistance if you experience any difficulties with programming or installation.
  • Page 74 Flybarless Setup 3 Move transmitter sticks as shown and compare the responses of the helicopter with those in the drawings. For example: If you fly mode 2 and give aileron to the right (top transmitter drawing - stick movement shown in red), the swashplate should tilt to the right (top drawing of helicopter - red arrow).
  • Page 75 Flybarless Setup 4 Important: The compensation in the FBL unit must work in the correct direction. Aileron compensation: Tilt helicopter to the right (blue arrow). The FBL unit should tilt the swashplate in the opposite direction (to the left-red arrow). Next, tilt the helicopter to the left.
  • Page 76 Flybarless Setup 5 Elevator Compensation: Observe helicopter/swashplate from the left side. Tilt nose of helicopter up (blue arrow - rotating helicopter clockwise). The swashplate must tilt forward (red arrow - rotating counter-clockwise) as shown in drawing. Tilt nose of helicopter down (blue arrow - rotating helicopter counter-clockwise).
  • Page 77 Flybarless Setup 6 Set the endpoints of the tail servo to both limits A Blades / 1200 - 1800 RPM 1800 - 2400 RPM and B (distance between slider and bearing). The Headspeed chart gives the value for different blades and rotor Compass A = 14mm / A = 13.5mm /...
  • Page 78 Rotation check When main rotor rotates clockwise (black arrow) tail blades should rotate counter clockwise (red arrow) observed from right side of the helicopter. If not, the belt is twisted in the incorrect direction (see step 47). Be sure that main rotor and tail rotor blades are installed in the correct direction.
  • Page 79 COMPASS MODEL (HK) LIMITED www.compassmodel.com Version: 1.2/ 13.11.2014...

Table of Contents