Staging sequence:
1
The first sheet (document 1) is diverted to the staging outer path. The second sheet (document 1) enters the
staging inner path.
2
The first sheet waits for the second sheet, and then both sheets (document 1) enter the compiler tray.
Note: The trailing edge of the first sheet is slightly nearer to the bottom catch of the compiler tray.
3
Each of the remaining sheets (document 1) enters the staging inner path, and exits to the compiler tray. While
ejecting the last sheet (document 1) to the compiler tray, the staging sequence restarts at step 1 for document
2.
A motor for each staging path drives the transport rollers.
Compiler tray edge alignment drive
Short edge alignment
6
4
5
1
Lift plate (raised)
2
Lower exit roller
3
Motor (MSHPF bin clamp)
4
Bottom catch
Appendix C: Theory of operation
1
2
3
1494
7564