5.16.3 Removing the Delivery Speed Switching Clutch
1) Slide out the fixing/feeding unit from
the copier.
2) Remove the fixing motor.
3) Remove the three screws [1], and detach
the fixing front support base [2].
4) Disconnect the two connectors [3], and
removed the two screws [4]; then, de-
tach the delivery speed switching clutch
[5].
When removing the delivery
speed switching clutch, take
care not to lose the bearings and
washer (rear only) found on
both sides of the clutch shaft.
COPYRIGHT© 2001 CANON INC.
CHAPTER 5 MAINTENANCE AND INSPECTION
2000 2000 2000 2000
CANON iR8500 REV.0 MAR. 2001
[1]
[2]
F05-516-07
[4]
[4]
[5]
F05-516-08
[1]
[3]
5-83