Canon iR8500 Servise Manual page 141

4 Installing the Card Reader-D1
4.1 Installing the Card Reader-D1
Install the Card Reader-D1 as follows:
Step
1 Start service mode, and make the
following selections:
COPIER>FUNCTION>INSTALL>CARD.
Of the numbers of the cards to use, enter
the lowest number: 1 through 2001.
As many as 1000 cards may be used
starting with the one assigned the lowest
number.
2 Turn off the copier's main power switch,
and disconnect its ower plug.
3 Open the front cover [1].
4 Shift down the fixing/feeding lever, and
slide out the fixing/feeding unit [2].
5 Open the toner cartridge cover [3].
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR8500 REV.0 MAR. 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[3]
[2]
F04-401-01
[1]
4-31