Canon iR8500 Servise Manual page 170

CHAPTER 5 MAINTENANCE AND INSPECTION
4) Move the No. 1 mirror base [7] to from
where the scanning lamp inside cover
has been detached; then, remove the
two screws [8], and detach the anti-re-
flection plate [9].
When mounting the anti-reflec-
tion plate, be sure to securely fit
it in the cut-off (front, rear) in
the No. 1 mirror base. In addi-
tion, be sure to fit the connector
discussed in step 4) securely to
the anti-reflection plate.
5-24
COPYRIGHT© 2001 CANON INC.
[9]
[7]
F05-501-03
anti-reflection plate
F05-501-04
anti-reflection plate
Cut-off (rear)
F05-501-05
2000 2000 2000 2000 CANON iR8500 REV.0 MAR. 2001
[8]
[8]
Cut-off (front)