Canon iR8500 Servise Manual page 533

SERVICE MODE
COPIER>I/O
<FEEDER (4/4)>
Address bit
AD-P01 tray value
AD-P02 post-separation sensor analog input
AD-P03 read sensor analog input
AD-P04 delivery reversal sensor analog input
AD-P05 not used
AD-P06 not used
AD-P07 not used
AD-P08 not used
DA-P01 reversal motor
DA-P02 belt motor
DA-P03 original sensor adjustment
DA-P04 trailing edge sensor adjustment
DA-P05 post-separation sensor adjustment
DA-P06 skew sensor adjustment
DA-P07 pre-registration sensor adjustment
DA-P08 post-registration sensor adjustment
DA-P09 reversal sensor adjustment
DA-P10 manual feed registration sensor adjustment
DA-P11 pre-cycle end sensor adjustment
DA-P12 separation motor
SORTER
Indicates the input/output ports of the finisher controller PCB.
<SORTER (1/12)>
Address bit
P001 0 buffer motor A
1 buffer motor B
2 buffer motor A*
3 buffer motor B*
4 delivery motor A
5 delivery motor B
6 upper path switch solenoid
7 buffer path switch solenoid
S-36
Description
Description
COPYRIGHT© 2001 CANON INC.
Notation
(hereafter, analog ports)
(hereafter, analog ports)
Notation
M2 during output,
alternately '0' and '1'
M2 during output,
alternately '0' and '1'
M2 during output,
alternately '0' and '1'
M2 during output,
alternately '0' and '1'
M3 during output,
alternately '0' and '1'
M3 during output,
alternately '0' and '1'
SL2 0: ON
SL1 1: keep, 0: release
2000 2000 2000 2000 CANON iR8500 REV.0 MAR. 2001
Remarks
Remarks