Canon iR8500 Servise Manual page 135

2.10 Setting the Cassette
Step
1 Press the release button of the cassette 3/
4; then, pull out the cassette to the front,
and remove the packing material.
2 Set the side guide plate of the cassette 3/4
to the hole indicated by the marking M
(A4/A3).
Fit the non-Inch member found in the
shipping box in the hole indicated as
follows:
A: STMT-R
H: LTR-R
Perform this step only if
Inch-series sheets are not
used.
3
To fit the index paper
attachment, perform the
following steps, step 3)
Memo
through 5):
Detach the sheet [2][3] from the mounting
sheet [1]; then, attach the mounting sheet
as indicated in the figure (F04-210-02)
[4].
4 Place the index tab sheet attachment [5]
on the mounting sheet.
5 Place the underlay sheet [6] in the
cassette.
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR8500 REV.0 MAR. 2001
CHAPTER 4 INSTALLATION
Checks/remarks
Non-Inch
member
F04-210-01
[5]
[2]
[4]
F04-210-02
Marking A
Marking B
[3]
[1]
[6]
4-25