Canon iR8500 Servise Manual page 118

CHAPTER 4 INSTALLATION
Step
7 Slide out the two slope plates from the
center of the skid.
8 Turn over the slope plates, and match the
pin holes in the skid and the pin holes in
the slope plates, and fit the pins (1 each).
Holding the grip (front, rear) of the copier,
slide the copier along the slopes off the
skid.
The pins are found attached
to the slope plates.
9 Take out the parts and auxiliary materials
from the cardboard box. Check to make
sure that none of the attachments is
missing.
4-8
Work
COPYRIGHT© 2001 CANON INC.
Checks/remarks
Skid
F04-202-08
Pin
F04-202-09
2000 2000 2000 2000 CANON iR8500 REV.0 MAR. 2001
Slope plate
Slope plates