Canon iR8500 Servise Manual page 507

SERVICE MODE
COPIER>DISPLAY
<ACC-STS>
Indicates the connection of an accessory.
FEEDER
Indicates the connection of an ADF. (0: no, 1; yes)
SORTER
Indicates the connection of a finisher and a puncher unit.
XY
X = 0: no finisher, 1: finisher, 2: saddle finisher,
Y = 0: no puncher unit, 1: 2-hole, 2: 2/3-hole, 3: 4-hole (FRN),
DECK
Indicates the connection of a paper deck (accessory). (0: no, 1: yes)
CARD
Indicates the presence/absence of a card reader (if no card reader is in-
stalled, '1' is indicated.) (0: no, 1: yes)
DATA-CON
Indicates the connection of a self diagnostic device. (0: no, 1: copy data
controller, 2: NE controller)
RAM
Indicates the memory size of the main controller (192 MB).
NIB
Indicates the connection of a network interface board. (0: no, 1: Ether
board, 2: Token Ring, 3: both)
LIPS-RAM
Indicates the memory size of the LIPS board (xx MB)
LIPS
Indicates the connection of a LIPS board. (0: no, 1: yes)
PS/PCL
Indicates the connection of the PS/PCL. (0: no, 1: PS/PCL, 2: PS kanji)
RIP1
Not used.
S-10
3: saddle finisher inserter,
4: saddle finisher + paper folding unit,
5: saddle finisher + inserter + paper folding unit;
4: 4-hole (SWDN)
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500 REV.0 MAR. 2001