Work Procedure 2 - Canon iR8500 Servise Manual

4.2.2 Work Procedure 2

a. Cleaning the Photosensitive Drum
b. Remove the Toner from the Magnet
Roller Assembly
c. Turning Over/Replacing the Cleaning
Blade
During the work, take care not
to rotate the magnet roller drive
assembly; otherwise, waste
toner may fall out of the center
assembly.
1) Slide out the process unit. (Be sure to
place the drum protective sheet over the
fixing/feeding unit.)
2) Take out the photosensitive drum.
3) Moisten the lint-free paper [1] with al-
cohol [2] (5 to 10 cc), and put drum
cleaning power [3] (CK0429; 0.2 to 0.3
g) on the lint-free paper.
COPYRIGHT© 2001 CANON INC.
CHAPTER 5 MAINTENANCE AND INSPECTION
2000 2000 2000 2000 CANON iR8500 REV.0 MAR. 2001
[3]
CK-0429
[1]
F05-402-05
[2]
5-19