Canon iR8500 Servise Manual page 516

<SENSOR>
Indicates the state of sensors.
DOC-SZ
Indicates the size of an original detected by the original size sensor.
DOC-SZ1
Indicates the output detected by the original size sensor 1.
DOC-SZ2
Indicates the output detected by the original size sensor 2.
DOC-SZ3
Indicates the output detected by the original size sensor 3.
DOC-SZ4
Indicates the output detected by the original size sensor 4.
<MISC>
Indicates other states.
FL-LIFE
Indicates the duty ratio when the scanning lamp is ON. (%)
STM-P-L
Indicates the lamp stop position for stream reading (large size). (0 to 6)
STM-P-S
Indicates the lamp stop position for stream reading (small size). (0 to 6)
SCAN-LMP
Indicates the number of times the scanning lamp has gone ON.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500 REV.0 MAR. 2001
SERVICE MODE
COPIER>DISPLAY
S-19