5.3 PCBs
5.3.1 Removing the Light Control PCB
1) Remove the right glass.
2) Remove the copyboard glass.
3) Remove the screw [1] of the No. 1 mir-
ror base; then, while pushing down the
three claws [2], remove the light control
PCB holder.
4) Disconnect the connector [3], and re-
move the screw [4]; then, detach the
light control PCB [5].
COPYRIGHT© 2001 CANON INC.
CHAPTER 5 MAINTENANCE AND INSPECTION
2000 2000 2000 2000
CANON iR8500 REV.0 MAR. 2001
[1]
F05-503-01
F05-503-02
[2]
[3]
[4]
[5]
5-35