Reset Call - Panasonic DBS576 Technical Manual

Section 700 - Operation
Hardware Requirements
• External relays, amplifier, and speakers are required for external paging.
Related Programming
• FF1-0-02: Paging Override
• FF1-0-03: Extension COS (Paging)
• FF1-0-04: Trunk COS (Paging)
• FF1-2: Dial Plan
• FF2: Trunk COS
• FF3: Extension COS
Considerations
• If an external paging system has been connected, pages can be made to paging groups 0-9
through the external speakers. Voice paging can also be heard over the extensions in groups 0-9.
• An extension can belong to more than one paging group.
• Only one page may be performed at a time. If you attempt to make a page while another
extension is paging, you will receive a busy signal.
• Beginning with Version 3.5 and higher, the paging system can be set to "timeout" if a page
remains unanswered for a specified length of time (0 to 255 seconds). If this feature is set and the
timeout period has elapsed, the page originator's handset will emit a Fast Busy Tone.

Reset Call

Description
If you dial a busy extension, the System allows you to quickly dial another extension by simply
pressing the last digit of the new extension number.
Operation
To use Reset Call to dial another extension (after a busy extension):
1. Lift the handset or press the ON/OFF key.
2. Dial an extension number.
3. Dial the last digit of the next extension number.
Example: You dial extension 213, but it is busy. To dial extension 214, enter 4.
Hardware Requirements
• N/A
Related Programming
576-36-700
Action
DBS 576 (USA) issued October 2000
Chapter 6. DSLT Features
Result
Intercom dial tone
Busy tone
6-39