Panasonic DBS576 Technical Manual page 194

Chapter 5. Key Telephone Features
Table 5-6. Text Message Replies
Message No.
1
2
3
4
5
Operation
To make an OHVA :
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the OHVA feature access code (default = 8).
4. Make your announcement
To answer an OHVA:
1. Press the OHVA Split key.
Note: You must program an FF key as a split key (default =
*71) to use this feature.
2. To return to the previous call, press the Split key again.
To transfer a call using OHVA:
1. Press the HOLD key to put the current call on hold.
2. Dial the extension number to which the call is being trans-
ferred.
5-70
Message Text Message No.
Take A Message
Please Hold
Will Call Back
Transfer
Unavailable
Action
Action
Action
DBS 576 (USA) issued October 2000
Message Text
6 User Defined
7 User Defined
8 User Defined
9 User Defined
0 User Defined
Result
Busy signal
• OHVA EXT XXX displays if busy
extension called (where XXX = calling
extension.
• EXT LED flashes
Result
Split key flashes red
The OHVA originating party receives
Busy signal.
Result
Current call on hold
Busy signal
Section 700 - Operation
576-36-700