Panasonic DBS576 Technical Manual page 88

Chapter 4. User Maintenance
5. Enter the Message number (0-9).
6. Press the HOLD key.
7. Enter the Absence Message (up to 15 characters):
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
4-19.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 4-20.)
Note: Press the FLASH key to clear any existing data.
8. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 4-19.
• See Example 2. Small-display phone on page 4-20.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
9. Repeat steps 7-8 as many times as necessary to enter the
desired Absence Message.
Note: Press the FLASH key to clear the entire entry.
10. Press the HOLD key to store the entry.
11. To set additional Absence Messages, press the volume up
or down key or press the HOLD key to move to the desired
Absence Message.
12. Repeat steps 7-11 until all Absence Messages are entered.
13. Press the AUTO key to exit the entry mode.
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
4-4
Action
DBS 576 (USA) issued October 2000
Section 700 - Operation
Result
A B C D E F X
displays (where X = Absence Message
number)
Next message number displays
Desired Absence Message displays
Enter Msg # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
576-36-700