Network Facilities - Panasonic DBS576 Technical Manual

Section 700 - Operation
8. Enter the speed dial name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
3-41.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 3-42.)
9. Use the bottom row of FF keys to select a single letter.
• See "Example 1. Large-display phone" on page 3-41.
• See "Example 2. Small-display phone" on page 3-42.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
10. Repeat steps 8-9 as many times as necessary to enter the
desired SSD name.
Note: Press the FLASH key to clear the entire entry.
11. Press the HOLD key when finished.
12. To enter another speed dial name, press the CONF key and
repeat steps 5-11.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• PSD names can contain a maximum of 7 characters. SSD names can contain a maximum of 16
characters.
• The ability to make extension name assignments is allowed/restricted to anyone with a Class of
Service (COS) that allows access to User Maintenance features. (See Chapter 4 "User
Maintenance" of this document.)

Network Facilities

Description
The System supports networking facilities such as:
• Network Attendant Reversion (Version 2.5 and higher)
• Network Call Routing
• Network Call Transfer
• Network Centralized Attendant (Version 2.5 and higher)
576-36-700
Action
DBS 576 (USA) issued October 2000
Chapter 3. System Features
Result
Next SSD bin number displays
SSD NO.=>
SSD NAME displays
3-45