Panasonic DBS576 Technical Manual page 160

Chapter 5. Key Telephone Features
To use Manual Camp-on:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the Camp-on (Call Waiting) code (default = 2).
4. Remain on the line until the called party answers.
To leave a text message while camped-on:
1. Press the MSG key.
2. Enter the Send Text Message number (1-9, 0). (See Table 3
on page 5-35 for the send text messages.)
To reply to a text message:
1. Press the MSG key.
2. Enter the Reply Text Message number (1-9, 0). See Table 4
on page 5-35 for the text message replies.)
To answer a Camp-on (Call Waiting) signal:
1. Replace the handset or press the ON/OFF key.
2. Lift the handset or press the ON/OFF key again to be con-
nected to the waiting call.
OR...
Press the HOLD key.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Manual Camp-on Send)
• FF1-0-03: Extension COS (Manual Camp-on Receive)
5-36
Action
Action
Action
Action
DBS 576 (USA) issued October 2000
Section 700 - Operation
Result
Intercom dial tone
Busy tone
• Wait XXX displays (where XXX =
extension number/name)
• Called party hears alert tone from the
speaker
• Calling party hears ringback tone
Result
The send text message appears on the
busy telephone display.
Result
The text message reply appears on the
camped on telephone display.
Result
• Current call placed on hold
• Connected to waiting call
576-36-700