Set Verified Account Codes - Panasonic DBS576 Technical Manual

Chapter 4. User Maintenance
13. To set additional text Messages, press the volume up or
down key or press the HOLD key to move to the desired
Send Text Message.
14. Repeat steps 9-13 until all Text Message Replies are
entered.
15. Press the AUTO key to exit the entry mode.
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A

Set Verified Account Codes

Description
(For a description of Verified Account Codes, see "Verified Account Codes" on page 5-7.)
You can enter up to 500 Verified Account codes. The System will store them in memory as valid
codes. Once the codes are entered here, a Toll Restriction Service (TRS) Class of Service (COS) can
be used with each code. You can then enter your code on someone else's phone to bypass the TRS
restrictions on that phone. (The TRS assigned to the Verified Account code will override the phone's
TRS.)
Operation
To set the Verified Account code:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 04.
3. Press the HOLD key.
4-38
Action
Action
DBS 576 (USA) issued October 2000
Section 700 - Operation
Result
Desired text message displays
Enter Msg # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8104-
Verified ACCD displays
576-36-700