Panasonic DBS576 Technical Manual page 195

Section 700 - Operation
3. Enter OHVA feature access code (default = 8) and
announce the call to be transferred.
4. If transfer is:
• Not accepted, retrieve the call by pressing the associ-
ated flashing MCO key (if an appearing call) or by
pressing the HOLD key (if a non appearing call).
• Accepted, and On-hook Transfer is enabled for your
extension, replace the handset or press the ON/OFF
key.
If On-hook Transfer is not enabled for your extension,
press the PROG key (or RELEASE key if using DSS/
72).
To reply to off-hook voice announcement with a text message:
1. Press the MSG key.
2. Enter the Reply Text Message number (1-9, 0). See Table 6
on page 5-70 for the text message replies.)
To answer a call after it has been announced using the OHVA:
1. Replace the handset.
2. Lift the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Related Programming
• FF1 0 03: Extension COS OHVA Originate
• FF1 0 03: Extension COS OHVA Receive
• FF3: Extension COS Assignments
• FF4: FF Key Assignments
Considerations
• The held call is transferred as soon as the extension sending the OHVA hangs up.
• If the transferred call is not answered immediately, it will queue for a set time limit, then return to
the extension sending the OHVA by transfer recall timer.
• You cannot receive a Call Waiting message during an OHVA.
576-36-700
Action
Action
Action
DBS 576 (USA) issued October 2000
Chapter 5. Key Telephone Features
Result
Result
The text message reply appears on the
camped on telephone display.
Result
Your extension rings
5-71