Section 700 - Operation
Flash Send
Description
Flash send allows you to send a flash to a CO line.
Operation
To send a flash on a CO line:
1. Hookflash to place the current CO call on hold.
2. Enter the SLT Flash Send access code (default = 765).
Related Programming
•
FF1-2: Dial Plan
•
FF5-5: Hot Line
Considerations
•
N/A
Hot Line
Description
Hot Line enables you to immediately connect to another pre-assigned extension or speed dial number
simply by lifting the handset. You do not have to dial any digits.
Operation
To immediately connect to a pre-assigned extension or speed dial number:
1. Lift the handset.
Related Programming
•
FF1-2: Dial Plan
•
FF5-5: Hot Line
Considerations
•
N/A
576-36-700
Action
Action
DBS 576 (USA) issued October 2000
Chapter 7. SLT Features
Result
Dial tone is returned
A flash is sent on the CO line. The CO
line will respond according.
Result
Automatically connected to pre-assigned
extension or speed dial number
7-27