Speed Dialing; Personal Speed Dial - Panasonic DBS576 Technical Manual

Section 700 - Operation
When a monitored extension receives a call, the caller hears a busy tone. Additional operations may
be performed from the monitored extension when it is in monitored mode:
1. Placing the handset back on-hook
2. Pressing digits 0-9, *, #
3. Flash
It is not possible to monitor an extension from an SLT telephone.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Allow/deny Busy Override Send—Monitoring extension)
• FF1-2-02: Dial Plan at DT Pattern 1
• FF1-2-03: Dial Plan at DT Pattern 2
Considerations
• Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring.
• If the monitored extension is placed on-hook while Room Monitoring is activated, the
monitoring extension will hear a fast busy tone.
• If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored
extension will remain in the monitored mode, and can be accessed by any other extension
allowed to access the room monitoring mode.
• A room cannot be monitored from more than one extension at a time. If an attempt is made to
monitor an extension while the extension is being monitored, the user will hear a fast busy tone.
• ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor or
monitored modes.
• A monitoring extension cannot forward a call on hold to a monitored extension.
• A monitored extension cannot receive a transferred call.

Speed Dialing

Description
The System supports the following speed dial features:
• Personal Speed Dial (PSD)
• System Speed Dial (SSD)
• Speed Dial Linking
• Speed Dial Name Assignment
576-36-700
Action
DBS 576 (USA) issued October 2000
Chapter 7. SLT Features
Result
Monitored mode is cancelled. Extension
returns to idle.
No response is given. Extension remains
in monitored mode.
Monitored mode is cancelled. Dial tone is
returned to handset.
7-35