Panasonic DBS576 Technical Manual page 361

Section 700 - Operation
9.
Table A-17. Example - Route Table
Route Pattern #
1
2
3
4
5
Table A-18. Example - Digit Modify Table Route Table
Digit Modify Pattern #
1
2
3
576-36-700
In this example, there are only 5 route patterns needed. The first three use the same trunks to the local CO.
The first pattern does not modify the dialed digits. The second pattern uses the Digit Modify Pattern to add
the Equal Access Code prefix for Long Distance Carrier A (preferred in the day time). The third pattern
uses the Digit Modify Pattern to add the Equal Access Code prefix for Long Distance Carrier B (preferred
at night and on week ends).
The fourth pattern selects the FX lines to City B and selects a digit modify pattern that removes the first 4
digits dialed (1205) so that the call originates at the CO (Exchange Line) as a local call.
The fifth pattern selects the toll-free outgoing trunks. No digit modification is required for these trunks.
Trunk Group
1 - Local CO (Exchange Line)
1 - Local CO to Carrier "A" (Day preferred)
(101XXXX)
1 - Local CO (Exchange Line) to Carrier "B"
(Night/Weekend preferred (101YYYY)
2 - FX to City B
3 - Outgoing toll-free numbers
Delete Digits
(Prefix, up to 24 digits)
0
0
4
DBS 576 (USA) issued October 2000
Digit Modify Pattern #
Add Digits
(Prefix, up to 10)
101XXXX
101YYYY
-
0 (not modified), 1-50
0
1
2
3
0
Add Digits
(Suffix, up to 10)
-
-
-
A-33