Handsfree Answerback - Panasonic DBS576 Technical Manual

Chapter 5. Key Telephone Features
Feature Description
Login Key for CTAPI
Message and Voice Mail Key
Silent Monitor Key
Call Record Key
Room Monitoring Set Key
Room Monitoring Initiate Key

Handsfree Answerback

Description
Handsfree Answerback allows you to answer an intercom call without lifting the handset.
The System must be programmed for Voice Calling for you to use this feature. You must press 1
during a call to switch from Tone Calling to Voice Calling.
Operation
To answer calls using Handsfree Answerback:
1. When the intercom call arrives, confirm that the MUTE
LED is off.
(If it is lit, press the MUTE key to turn it off.)
2. Speak into the microphone to answer.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Calling Type)
• FF1-0-03: Extension COS (Voice Call Send)
• FF1-0-03: Extension COS (Voice Call Receive)
• FF3: Extension COS
Considerations
• Handsfree Answerback can be used to respond to only voice calls from other extensions - not
tone calls.
5-56
Fixed Feature Code
+ (additional digits to program into
key)
* # 90
Note: The following feature keys were added with Version 3.0
76 + (Ext. No. 0-9999)
77 + (Ext. No. 0-9999)
78 + (Ext. No. 0-9999)
Γ#05
Γ#06
Action
DBS 576 (USA) issued October 2000
Section 700 - Operation
Default Flexible
Feature Code
(if not listed, must use
Fixed Feature Code)
(Version 2.5 or higher)
768
775
776
Result
576-36-700