Call Forwarding And Do-Not-Disturb; Call Hold - Panasonic DBS576 Technical Manual

Hide thumbs Also See for DBS576:
Table of Contents

Advertisement

Section 700 - Operation

Call Forwarding and Do-Not-Disturb

The System allows you to set or cancel both Call Forwarding and Do-Not-Disturb (DND) for your
own extension in one step.
To cancel Call Forwarding and DND:
1. Lift the handset or press the ON/OFF key.
2. Enter the CF/DND All Clear code (default = 7**).
3. Replace the handset or press the ON/OFF key.
Hardware Requirements
N/A
Related Programming
FF1-0-03: Extension COS (Call Forward/All/Busy/No-Answer and DND Cancel)
FF1-0-03: Extension COS (Call Forward/All Calls)
FF1-0-03: Extension COS (Call Forward/Busy)
FF1-0-03: Extension COS (Call Forward/No Answer)
FF1-0-03: Extension COS (Call Forward/Other)
FF1-2: Dial Plan
Considerations
Calls cannot be forwarded to an extension that already has Call Forwarding DND activated.For
example, extension 220 can only forward to extension 225 if 225 is not forwarded.
If forwarding to an outside number, the destination number must be pre-programmed into a
System Speed Dial (SSD) code.
Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.
You can set Call Forwarding - All Calls while Call Forwarding - No Answer and/or Call
Forwarding - Busy are set. Canceling one mode only affects that mode; however, the other
modes will remain set until canceled individually.
An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A
manual camp-on to a busy extension will not forward.
If Call Forwarding No Answer and DND are both set, calls immediately forward to the Call
Forward No Answer destination.
You can cancel both Call Forwarding and DND by entering 7 * *.

Call Hold

Description
The system provides the following types of Call Hold:
576-36-700
Action
DBS 576 (USA) issued October 2000
Chapter 6. DSLT Features
Result
Intercom dial tone
6-15

Advertisement

Table of Contents
loading

Table of Contents