Last Number Redial; Message Waiting/Callback - Panasonic DBS576 Technical Manual

Section 700 - Operation

Last Number Redial

Description
Last Number Redial allows you to automatically redial the last number dialed.
Operation
To automatically redial the last number dialed:
1. Lift the handset.
2. Enter the SLT Redial code (default = 712).
3. Complete the call and replace the handset.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Redialing)
• FF3: Extension COS
Considerations
• Extension Class of Service (COS) determines whether Last Number Redial can be used for both
intercom and CO calls or CO calls only.

Message Waiting/Callback

Description
If you try to call an extension that is busy or does not answer, you can leave a message wait indication
at that extension, requesting a return call.
Operation
To leave a message waiting indication:
1. Lift the handset.
2. Dial the extension number.
3. While the telephone is still ringing, or when you hear the
busy tone, enter the Message Wait Set code (default = 4).
4. Replace the handset.
576-36-700
Action
Action
DBS 576 (USA) issued October 2000
Chapter 7. SLT Features
Result
Result
Intercom dial tone
Ring or busy tone
7-29