Chapter 5. Key Telephone Features
Trunk Group Pickup
Trunk Group Pickup allows you to answer calls ringing to any extension within your own MCO
incoming trunk group.
Operation
To use Trunk Group Pickup:
1. Lift the handset or press the ON/OFF key.
2. Enter the Trunk Group Pickup code (default = 709).
3. Complete the call and replace the handset or press the ON/
OFF key.
Hardware Requirements
•
N/A
Related Programming
•
FF1-2: Dial Plan
•
FF5-3: MCO-Inbound Trunk Group
Considerations
•
N/A
Trunk Direct Pickup
Trunk Direct Pickup allows you to answer calls ringing on a specific trunk number.
Operation
To use Trunk Direct Pickup:
1. Lift the handset or press the ON/OFF key.
2. Enter the Trunk Direct Pickup code (default = *0).
3. Dial the number of the ringing or holding (system) trunk.
4. Complete the call and replace the handset or press the ON/
OFF key.
Hardware Requirements
•
N/A
Related Programming
•
FF1-2: Dial Plan
5-26
Action
Action
DBS 576 (USA) issued October 2000
Section 700 - Operation
Result
Intercom dial tone
Extension number or outside phone num-
ber displays
Result
Intercom dial tone
Outside number displays
576-36-700