Step Call (Reset Call) - Panasonic ICX Section 700 Technical Manual

Section 700 - Operation
4. Enter the Walking TRS (Call Barring)/Station Lockout
security code.
5. Replace the handset or press the ON/OFF key.
To change the Walking TRS (Call Barring)/Station Lockout security code:
1. Lift the handset or press the ON/OFF key.
2. Enter the Walking TRS (Call Barring)/Station Lockout
Security Code Change code (default = 749 [UK/HK] or
749# [Taiwan, Malaysia, Indonesia]).
3. Enter the current Walking TRS (Call Barring)/Station Lock-
out security code.
4. Enter the new Walking TRS (Call Barring)/Station Lockout
security code.
5. Replace the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Considerations
• Walking TRS (Call Barring) and Station Lockout use the same security code.
• You cannot override station lockout using Walking TRS (Call Barring) feature.
• If you enter an incorrect key code and then try to dial, the phone will issue a busy tone.
• If station lockout is set, the phone is limited to the Station Lockout TRS (Call Barring) Class
outside calling abilities. This TRS (Call Barring) Class should be carefully selected to only allow
the desired call types.
• Without Walking TRS (Call Barring) /Station Lockout Security Code, you cannot set the Station
Lockout feature.

Step Call (Reset Call)

CPC-96, CPC-288, and CPC-576 All Versions
Description
If you dial a busy extension, the system allows you to quickly dial another extension by simply
pressing the last digit of the new extension number.
ICX-35-700
Action
Action
ICX (International), issued March/1999
Chapter 5. Key Telephone Features
Result
Cleared St. Lock displays
The telephone display returns to the nor-
mal display.
Result
Intercom dial tone
Enter Old ID displays
Enter New ID displays
Stored ID Code displays
The telephone display returns to the nor-
mal display.
195