Panasonic DBS576 Technical Manual page 276

Chapter 6. DSLT Features
To cancel Station Lockout feature for another extension:
1. Lift the handset.
2. Enter the Station Lockout Cancel for another extension fea-
ture code (default = 748).
3. Dial the extension number to activate station lockout.
4. Enter the Walking TRS/Station Lockout security code.
5. Replace the handset.
To change the Walking TRS/Station Lockout security code:
1. Lift the handset.
2. Enter the Station Lockout Security Code Change code
(default = 749).
3. Enter the current Walking TRS/Station Lockout security
code.
4. Enter the new Walking TRS/Station Lockout security code.
5. Replace the handset.
Related Programming
• FF1-0-03: Extension COS (Station Lockout Enable/Disable)
• FF1-0-03: Extension COS (Station Lockout for another Extension Enable/Disable)
• FF1-2-02: Feature Codes (Station Lockout Code)
• FF1-2-02: Feature Codes (Station Lockout other Extensions Code)
• FF1-2-02: Feature Codes (Station Lockout Cancel other Extensions Code)
• FF1-2-02: Feature Codes (Walking TRS/Station Lockout Security Code Changing Code)
• FF1-0-19: TRS Class Under Station Lockout
• FF8-1-08: Walking TRS/Station Lockout Security Code
Considerations
• Walking TRS and Station Lockout use the same security code.
• You cannot override station lockout using Walking TRS feature.
• If you enter an incorrect key code and then try to dial, the phone will issue a busy tone.
• If station lockout is set, the phone is limited to the Station Lockout TRS Class outside calling
abilities. This TRS Class should be carefully selected to only allow the desired call types.
• Without Walking TRS/Station Lockout Security Code, you cannot set the Station Lockout
feature.
6-48
Action
Action
DBS 576 (USA) issued October 2000
Section 700 - Operation
Result
Intercom dial tone
Result
Intercom dial tone
576-36-700