Mco Line Preference; Mco Trunk Access - Panasonic DBS576 Technical Manual

Chapter 5. Key Telephone Features
Related Programming
• FF1-0-03: Extension COS (Direct Trunk Access)
• FF3: Extension COS
Considerations
• N/A

MCO Line Preference

MCO Line Preference allows you to place an outside call by simply picking up the handset. When you
go offhook, the MCO 1 trunk group is automatically accessed.
Operation
To place a call using MCO Line Preference:
1. Lift the handset.
2. Dial the phone number.
Hardware Requirements
• N/A
Related Programming
• FF1: MCO Trunk Access
• FF3: MCO
• FF5-2: MCO Trunk Groups (Outbound)
Considerations
• You can press the ON/OFF key to get intercom dial tone.

MCO Trunk Access

The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle trunk
from the MCO trunk group by entering the MCO access code.
Operation
To seize an idle trunk:
1. Lift the handset or press the ON/OFF key.
5-96
Action
Action
DBS 576 (USA) issued October 2000
Section 700 - Operation
Result
• Outside dial tone
• CO XXX displays (where XXX = trunk
number)
Dialed phone number displays
Result
Intercom dial tone
576-36-700