B.5.2.2 Operation Info Screen - Image Access WideTEK 25 Operation Manual

B.5.2.2 Operation Info Screen
In the section Information
various scan counters and elapsed times.
The following table gives a brief description.
Field
Total Scan Count
Total Power Up Cycles
Total Operating Time
Lamp Operating Time
Remaining Lamp Operating
Time
To return to the USER screen (Picture 84) scroll down completely and click the
button Back to Main Menu or click on the "Return" button in your browser.
To return to the Login screen (Picture 83) click the button
Click the button Launch Scan Application to switch directly to the main screen of the
integrated S2N user interface.
Manual
click the button Operation Info and the following list will show
Picture 86: Operation Info screen
Description
The total number of scans performed since the scanner left
the factory. Each CCD scan cycle is counted.
The total number of power up cycles performed since the
scanner left the factory. This function counts the start/stop
button invoked cycles only.
The total operating time since the scanner left the factory.
This is the on-time only, standby time does not count.
The total lamp operating time since the scanner left the
factory. This is the on-time including dimmed lamp periods.
The typical remaining lifetime of the lamps. The lamps
usually last for the complete lifetime of the device.
Setup Menu
Page 93