Maintenance; Touchscreen; Surfaces; Glass Plate - Image Access WideTEK 25 Operation Manual

A.6

Maintenance

Important: Ensure that no liquids will penetrate into the device housing.
A.6.1

Touchscreen

Before cleaning the touchscreen, switch the WideTEK 25 off and set the main power
switch to position 0.
The touchscreen can be cleaned with a micro fiber cloth.
A.6.2

Surfaces

Use a soft, dampened cloth to clean the housing of the scanner. Recommended is a micro
fiber cloth.
A.6.3

Glass plate

Important: Do not use any cleanser with solvents to clean the glass plate!
The glass plate of the WideTEK 25 has a special non-reflective surface coating.
Clean the glass plate with an appropriate glass cleaner and use a soft cloth.
Recommended is a micro fiber cloth.
After cleaning dry the glass plate with a soft cloth.
A.7

Repair

Note: There are not any parts or components of the WideTEK 25 scanner which can
be repaired by the user.
All repairs and service works should be done by a trained technician only.
Page 18 Manual