C.3 Warnings - Image Access WideTEK 25 Operation Manual

Error codes, part 3
Error # Error message shown in
the display
69 Error 69:
ADC error camera 1
70 Error 70:
ADC error camera 2
75
99
C.3 Warnings
Warning Warning shown in the
# display
144
145 Camera adjustment required Camera adjustment required General information about the
160 W160 NO WHITE
BALANCE
C.4 Information
Info. # Information shown in the
display
200 CREATING
RECOVERY PART..
Manual
Error message sent to
application
Camera 1 adc error.
Camera 2 adc error.
General keyboard error
Internal error.
Warning sent to
application
Light level is low
No white balance data
DATA
Information sent to
application
Creating Recovery Partition While creating the recovery partition,
Problem description
Test data transfer through analog
digital converter failed. Check cables
/ connectors to camera 1.
Test data transfer through analog
digital converter failed. Check cables
/ connectors to camera 2.
General keyboard error. Check
keyboard and cables.
The firmware has detected an
internal error of unknown cause.
Problem description
The light level is found to be low
during the white balance function.
camera adjustment. Check for
details and readjust.
No white balance data was found.
Perform white balance.
Description
the scanner can not be accessed.
Page 103