About This Manual - Image Access WideTEK 25 Operation Manual

About this Manual

Operation Manual
The Operation Manual gives all information about the normal operation and behavior
of the device. It is written for people who only operate the device and do not perform
setup and adjustment procedures. All device elements and software functions are
described in detail, although some of them might never be used. This manual does not
cover any application software. Refer to the appropriate application software manual to
learn about the application software.
Setup and Assembly Manual
The Setup and Assembly Manual is written for technical staff with some basic
mechanical as well as software skills. Many resellers will offer on-site installation;
therefore, large parts or all of the setup and assembly manual might not be of interest
to the reader. The access level at which the setup and adjustment processes are
performed is called "Power user". This "Power user" level is password protected from
access by the normal operator.
All manuals can
http://service.imageaccess.de. Be sure to always check for the latest versions of these
manuals.
This manual is divided into four sections, A to D.
Section A describes the hardware of the device. It includes unpacking and
mechanical installation. These instructions must be followed carefully to
ensure proper functionality, best possible quality and performance of the
device. This device is a precise optical instrument and should be
handled accordingly.
Section B describes the software setup. It includes the optical adjustments
necessary after the setup. The section also describes the installation
procedure for software options.
Section C describes troubleshooting procedures and test scan generation.
Section D shows all technical data and declarations.
Manual
be downloaded from our customer service portal at
Page 5