B.3.5 Output Option Copy - Image Access WideTEK 25 Operation Manual

B.3.5 Output Option Copy
This output option prints directly to a previously installed network printer. The
is used to configure the remotely connected printer.
B.3.5.1 Remote Printer
Parameter
Printer Preset
Connection Type
Address
(with IP Networking only)
Port (9100)
(with IP Networking only)
Connection Timeout
(with IP Networking only)
Port (139)
(with SMB Printer Queue only)
Server Authentication
(with SMB Printer Queue only)
Note: Each change of an entry field is transferred to the scanner immediately.
Page 74
Picture 73: Output Option Copy
Description
Choose a printer configuration out of five possible sets of
parameters. If you click on
the name of this set.
Choose between IP Networking and SMB Printer Queue.
Enter the IP address of the printer.
Enter the IP port of the remote printer. Default is port 9100.
Choose the timeout for connecting to the remote printer
before the connection is aborted.
Enter the IP port of the remote printer. Default is port 139.
Select Yes or No
Option
Change Name you can change
key
Manual