Picture 51: Additional Margin/Auto Density Slider - Image Access WideTEK 25 Operation Manual

Additional Margin [mil]
An Additional Margin [mil]

Picture 51: Additional Margin/Auto Density slider

The desired value can be entered as a numeric value or by clicking on the slider and
moving it to the desired value.
If a numeric value us entered, confirm the input with the ENTER key or the TAB key on
the PC keyboard.
Auto Density (Binary)
The Auto Density (Binary)
format detection. Default value: 40
When scanning dark documents, the value should be reduced in small steps until the
desired result is achieved.
In general: The higher the numeric value, the more contrast is necessary between
background and scanned document.
Use Deskew
The Use Deskew control activates the automatic deskew function.
Picture 52: "Maximum Deskew" angle
The desired value can be entered as a numeric value or by clicking on the slider and
moving it to the desired value.
If a numeric value us entered, confirm the input with the ENTER key or the TAB key on
the PC keyboard.
Page 60
can be added to or taken away from the image.
The margin is defined in mil (1/1000 inch).
parameter defines the scanner's sensitivity for the automatic
If Yes is selected, a slider is displayed which
allows to set the maximum corrected angle.
Manual