Picture 22: Output Control 1; Picture 23: Viewer Control; A.12.8 Output Control Screens - Image Access WideTEK 25 Operation Manual

A.12.8 Output Control Screens

The parameters are set in two screens, Output Control 1 and Output Control 2.
To switch between the Output Control screens use the buttons
A.12.8.1 Output Control 1
A.12.8.1.1 Viewer Control
An external monitor can be connected to the WideTEK 25 to show the scanned image
directly.
Touching the Viewer Control button starts the Zoom/Move Control mode. When this
mode is active, the displayed image on the screen can be moved and the zoom factor can
be changed.
Navigation
keys
Increases the zoom factor.
Decreases the zoom factor.
Zooms the image to its genuine dimension (100%) without scaling.
Returns to the prior menu.
If the image dimension overlaps the monitor dimension, the navigation keys can be used
to scroll the displayed area on the monitor.
Manual

Picture 22: Output Control 1

Picture 23: Viewer Control

and .
Page 33