Version History - Image Access WideTEK 25 Operation Manual

Version History

Version Published in
A April 2008
B May 2008
C June 2008
D October 2008
E December 2008
F March 2009
G September 2009
G2 February 2010
G3 September 2010
G4 October 2011
G5 December 2011
As an ENERGY STAR® Partner, Image Access has determined that this
product meets the ENERGY STAR® guidelines for energy efficiency.
Page 6
Content/Changes/Supplements
Preliminary release version.
Because of the preliminary status of this manual some variations
in the screenshots of the S2N user interface are possible.
Preliminary version for S2N software version 5.
First release.
Hardware improvements: Two transportation locks at the back.
Some minor modifications in the wording of the describing texts.
Additional information concerning the menu "Format" in the S2N
user interface.
Firmware V 5.20.
New functions in the S2N user interface / the touch panel.
New: Adaptive Stitching 2D, "Image Control 2" menu in the touch
panel.
Chapter B.2.3.2 added. Description of "Despeckle" function.
Some minor modifications in the wording of the describing texts.
Additional information about certifications.
Order of chapters A.5 to A.8 has been changed.
Chapter D.3 Electr. Spec.: New value for stand-by consumption,
another power supply is used.
Former chapter A.6
(A.6 Maintenance and A.7 Repair). The following chapters have
been renumbered.
Update of some device pictures.
Touchscreen menu "Output Option" has been split in two menus.
S2N user interface "Output Option Multipage" added, chapter
inserted as B.3.3. All following chapters renumbered.
"Output Option Web" added as chapter B.3.9, all following
chapters renumbered. Chapter B.3.3, information about container
format added.
Update Technical Data.
has been split into two chapters
Manual