Picture 12: Self Test 1; Picture 13: Self Test 2; A.12.6 Self Test Mode - Image Access WideTEK 25 Operation Manual

A.12.6 Self Test Mode

While the start sequence is running, the WideTEK 25 can be switched to Self Test mode.
Tapping on the touch panel at least three times starts the setup mode. After the start
sequence is finished, the touch panel shows the Self Test 1 screen.
To move forward to the Self Test 2 screen touch the button
To return to the former screen touch
Manual

Picture 12: Self Test 1

Picture 13: Self Test 2

.
.
Page 27