Image Access WideTEK 25 Operation Manual page 81

Mail Server, continued
Parameter
Address
Port (25)
Server Authentication
Login
(if Server Authentication is set to Yes)
Password
Protocol
Connection Time Out
Use LDAP Directory
Service
File Name
(only with automatic)
Recipient
(only with automatic)
Sender
(only with automatic)
Mail Subject
(only with automatic)
Reply To
(only with automatic)
Force disposition
notification?
(only with automatic)
Configuration Test:
Note: Each change to an entry field is transferred to the scanner immediately.
Manual
Description
Enter the IP address of the outgoing mail (SMTP/LMTP)
server.
Enter the IP Port of the outgoing mail server.
Default: Port 25.
Set to YES if the mail server requires an authentication.
Enter the user name for authentication at the outgoing mail
server.
Enter the password for authentication at the outgoing mail
server. The password is stored using encryption.
Choose the connection protocol. SMTP is the most
common protocol.
Choose the timeout for connecting to the outgoing mail
server before the connection is aborted.
Select Yes to use the LDAP function of the network where
the scanner is installed.
Enter the file name. Variables can be used to complete the
file name. To learn more about the variables, click on the
link Wildcard characters.
Type in the recipient of the e-mail.
Format: fully qualified e-mail address.
Type in the sender of the e-mail.
Format: fully qualified e-mail address.
Type in the e-mail subject. (Optional)
Variables can be added to the mail subject. To learn more
about the variables, click on the link
Type in a reply address for answers. (Optional)
Format: fully qualified e-mail address.
Request for a notification when the recipient has opened
the mail.
Note: This feature is not supported by all mail servers or
clients.
Click on this link to test the settings. A separate window will open
and shows the test results.
Wildcard characters.
Page 81