Operation Info Screen - Image Access WideTEK 48C Operation Manual

D.1.2

Operation Info Screen

Click the button Operation Info to show various scan counters and elapsed times since
the first start of the scanner.
The following table gives a brief description.
Field
Total Scan Count
Total Power Up Cycles
Total Operating Time
Lamp Operating Time
Remaining Lamp
Operating Time
Manual
Picture 77: Operation Info screen
Description
The total number of scans performed since the scanner
left the factory. Each CCD scan cycle is counted,
regardless of it being a pre-scan or a full scan.
The total number of power up cycles performed since the
scanner left the factory. This function counts the start/stop
button invoked cycles only.
The total operating time since the scanner left the factory.
This is the on-time only, standby time does not count.
The total lamp operating time since the scanner left the
factory.
The typical remaining lifetime of the lamps. With normal
working conditions the lamp life is sufficient for the lifetime
of the device.
Page 71