Picture 46: Shutdown Confirmation - Image Access WideTEK 25 Operation Manual

2: The control buttons in the lower part of the screen control the output modes.
When selecting Save
window a box opens where the desired directory can be set.
As default the output mode
onto the button Scan Now a window opens and shows the image.
Selecting Multipage
displayed. Clicking on
Selecting Print will display the scanned image in a second window and direct the
scanned image to locally available printers.
Selecting Copy prints directly to a previously installed network printer.
Selecting FTP Upload
Selecting Mail sends the scanned image directly to a previously defined e-mail
address.
Selecting Network
workstation in the network.
Selecting Web transfers the scanned image directly to a previously defined web
service. The available services can be selected from a list.
Selecting USB the scanned image is stored on an USB stick. A USB stick can be
connected to the scanner at the connector at the front side.
3: The frame on the left side shows the buttons for preview scan (Preview) and main
scan (Scan Now).
Pressing this button switches the scanner off.
If the red button is pressed, the following window will appear.
Click on the button Shutdown and the scanner switches off.
Page 54
the scanned image will not be displayed. Instead of the second
Show is selected. After clicking onto the button Preview or
allows creating a multipage image. The scan result will not be
Finalize opens an additional window and shows the images.
scans directly to a FTP server.
uploads the scanned image directly to a previously defined

Picture 46: Shutdown confirmation

Manual